The product manual available here on our site or here in our DNA software provides useful information for the usage and maintenance of this product.
Before starting up, check that the pump is properly primed; fill it completely with clean water by means of the hole provided after having removed the filler cap on the discharge body. This ensures that the mechanical seal is well lubricated and that the pump immediately starts to work regularly. The filler cap must then be put back in place. Dry operation causes irreparable damage to the mechanical seal and the stuffing box seal.
Was this FAQ helpful?
YESNO
How can I set the right motor rotation direction of the KDN pump?
The direction of rotation must be checked only in three-phase pumps (then pumps powered at 400 volts). In single-phase pumps (230 volts) the motor always rotates in the correct direction. We always recommend checking the product manual here and here in our DNA software. The direction of rotation must be clockwise.
