The product manual available here on our site or here in our DNA software provides useful information for the usage and maintenance of this product.

The pump is not sucking

• No water in the pre-filter or clogged pre-filter
• Close valve in the pipes
• Air getting into the suction pipe

Noisy pump

• Air getting into the suction pipe
• Presence of foreign bodies in the pump body
• Cavitation

Periodically inspect and clean the pump filter:

Installation, electrical connection and commissioning must be carried out by skilled personnel in compliance with the general and local safety regulations in force. Failure to comply with these instructions not only causes risk to personal safety and damage to the equipment, but invalidates every right to assistance under guarantee.
The product manual available here on our site or here in our DNA software provides useful information for the usage and maintenance of this product.
Follow the wiring diagrams:

For three phase motors check the correct direction of rotation of the motor which must be clockwise. Otherwise invert any who phase leads, after having disconnected the electro pump from the power mains.

The product manual available here on our site or here in our DNA software provides useful information for the usage and maintenance of this product.
In the case of electropumps without a cable, provide power cables type H05 RN-F for internal use and type H07 RN-F for external use, complete with plug (EN 60335-2-41).